Skip to main content

HIAD Causes: System Design Error


[Note of HIAD Validator: the presence of hydrogen and its role in the explosion is only one of the two possible explanations of this incident] The explosion occurred in a chemical reactor tank of a…
The accident occurred during the first phase of the batch synthesis of tricarbonyl compound (methylcyclopentadienyl) manganese (TMCM), while the reaction mixture in the reactor consisted of more than…
In a chemical plant, a violent explosion took place during the batch production of chlobenzorex from an aqueous solution of sodium borohydride contained in a feed tank on a movable truck. The reason…
The incident affected a linear alkyl-benzene (LAB) plant. The plant was down for routine maintenance when an explosion occurred. An explosion and fire occurred at a 3000-gallon (approx. 11400 l)…
A lightning strike caused a voltage drop on the power supply of a chlorine-alkali plant using the mercury process. The emergency electrical system was activated, though restoring the external supply…
The incident occurred at the chlorine electrolyser. Failure of a strainer allowed sand from brine filters to get into mercury cells in a chlorine plant. It appears that the sand obstructed the flow…
The event occurred at the chlorine drying towers. The towers, made of PVC, exploded suddenly and violently in a mercury amalgam cell chlorine plant. Because of failure of the electrical power system…
During chlorine-alkali electrolysis an accident occurred in which chlorine was released due to a chlorine-hydrogen explosion. The person charged with the control of the measurements was informed by…
Employees were trying to open the manhole cover (600 mm diameter) of a hydrofluoric acid tank with a grinder, when an explosion occurred. The explosion was probably caused by the presence of hydrogen…
The vent occurred in the ammonia production unit. A minor leak had been detected in a flange on the piping of the ammonia synthesis loop (operating at 250 bar). The company called a specialized…

A series of explosions occurred at a renewable hydrogen installation facility part of a Research & Development project. It was caused by the formation of a flammable hydrogen-oxygen mixture in…

The incident occurred at a hydrogen production plant, consisting of an electrolyser, a gasholder for the temporary storage of the hydrogen, compressors and gas dryers and final storage in four high…
A hydrogen production plant was affected by an exploded, throwing debris for tens of metres and badly damaging the plant. The two workers in the plant at the time were not seriously injured. The…
An explosion and fire occurred at a hydrogen production plant serving the hydrocracker and the diesel hydroteater of a nearby refinery. According to the plant owner, the incident occurred in the…

The incident occurred on a laser cutting system, and affected the top of a water storage tank. The water was used to cool the cutting part. The plant is mainly dedicated to steel cutting, but the…

An explosion occurred in a Dewar used for metals tensile testing at liquefied hydrogen temperatures. The container consisted of vacuum insulated bottom and of cylindrical shaped polyurethane foam…

An explosion occurred during tensile tests of metals in a liquid hydrogen vessel. efforts were made to prevent air from entering by using a flexible top skirt designed to allow for movement of the…

The laboratory works with soil bacteria that cannot survive in the presence of oxygen. As a result, research work is conducted inside a plastic chamber in which the chemical constituents in the air…
This entry reports only the role of hydrogen in this nuclear accident. For a short description of the initial causes and the incident evolution, see "pre-event summary” and for a much more detailed…
A hydrogen gas holder exploded. It is assumed that there was diaphragm leak in the hydrogen-oxygen electrolytic cell used to produce high purity hydrogen for a pharmaceutical hydrogenation.