Skip to main content

HIAD Causes: Material/Manufacturing Error


The sodium chlorate production unit had restarted after a maintenance shutdown phase. The mercury cells had been under nitrogen flushing since the beginning of the shutdown to avoid the presence of…
The explosion occurred in a plant for the production of butter. It was due to the rupture of a hydrogen tank, during a sterilisation process at high temperature (so-called UHT treatment). Two…
The fire occurred around 13:20 on three cells of the chlorine manufacturing unit. A leak of hydrogen in the electrolysis room was at the origin of the fire; the ignition of the H2 cloud caused a…
A hot oil line (8-inch) in the hydro-desulphurisation (HDS) unit failed due to fatigue cracking. Hot oil at 50 bar and 343°C sprayed across the roadway into the hydrogen units where ignition occurred…

This incident occurred at a 70MPa hydrogen refuelling station. After completing a filling test, the pressure in the filling hose suddenly dropped. A worker heard the hissing sound of a hydrogen…

The event occurred in a bus garage when carrying out the purging process of the hydrogen cylinders. This process was executed via an electronic control system, but it was found that one cylinder…
The station was storing 6,000 litres of liquid hydrogen in ten tanks. Rescue services were alerted and the station's activity is interrupted. The leak was stopped by closing the valves. According to…
Alarm received by firefighters around midnight by a resident who heard abnormal noise under the Beaumont Bridge while walking his dog. Perimeter of security set up very quickly with isolation of the…

A liquid hydrogen tanker was en route on the highway when the driver noticed a vapour plume in the rear-view mirror. The driver exited the highway and stopped at the first available safe location.…

The release affected a stationary hydrogen storage consisting of a cryogenic vessel at a manufacturing facility. The A burst disc opened releasing hydrogen through a vent stack located between…
The truck was carrying 25 m3 of liquid hydrogen and was parked in the parking lot of a road restaurant. The hydrogen escaped through the safety devices of the tank and then dispersed (the weather was…
During a leak test performed on a new retention basin of a chemical plant, one of the walls of the structure collapsed on a rack of 4 pipes located nearby and caused the rupture of the supports and…
The accident occurred at a production, distribution and storage station for hydrogen city busses. After filling the hydrogen cylinders of a bus, the hydrogen detection system of the bus triggered an…
A hydrogen leak occurs at a gas cylinder storage tank park in a nuclear power plant. Employees locate the origin of the leak on a defective pressure regulator. They isolate the hydrogen release and…

The release occurred during refuelling of the mobile storage system. This operation was part of a series of tests aiming at verifying the tightness of the system. When opening a valve to connect…

The incident involves a gas booster provided by a manufacturer. This device is used in the experimental platform of the project to raise the pressure in pipelines from 60 to 80 barg (from 6 to 8 MPa)…
A hydrogen explosion occurred on a furnace in a company of copper metallurgy. The incident occurred at the end of the production cycle, when the furnace bell is lifted at the end of the cooling…
This accident occurred at the unit producing synthetic adhesives by adding hydrogen to petroleum resin under high temperature and pressure. Hydrogen was added to the reaction via a supply pipe at the…
A truck transporting a pallet of 30 compressed hydrogen cylinders was traveling on a highway when gas started leaking from the welded pipe. The fire department ordered the hydrogen in to be released…

A CGH2 trailer-tractor arrived at a customer’s site for delivery. When stopping at gate and coming out of the cab, the driver noticed a noise coming from the rear of the trailer. The driver opened…